+
Related Flashcards
Cards In This Set
| Front | Back |
|
What are two VLAN identification encapsulation (Frame tagging) methods?
|
ISL (Cisco)
IEEE 802.1Q (IEEE)
|
|
VLAN breaks _____ domain.
|
Broadcast
|
|
What type of VLAN is only part of one VLAN?
|
Access link
|
|
Are all VLANs allowed over a new trunk as default?
|
Yes
|
|
Commands to create Admin VLAN ID 10 and Sales VLAN ID 20?
|
Vlan 10
name Admin
vlan 20
name Sales
|
|
Commands to assign f0/1 to VLAN 10 and f0/2 to VLAN 20?
|
Int f0/1
switchport mode access
switchport access vlan 10
int f0/2
switchport mode access
switchport access vlan 20
|
|
Command to view VLAN 10 information?
|
Show vlan id 10
|
|
Command to view all VLANs configured on a switch and ports assigned to each VLAN?
|
Show vlan (brief)
|
|
Command to delete vlan 10?
|
No vlan 10
|
|
To create a 'Router on a stick', what type of router int should be used to provide inter-VLAN routing?
|
Fast Ethernet
Gigabit Ethernet
|
|
Command to enable between-Vlan routing on 3550?
|
Ip routing
|
|
Command to set f0/1as trunk/dynamic desirable port on 2960 switch?
|
Int f0/1
switchport mode trunk/dynamic desirable
|
|
Command to configure f0/1 as trunk port with IEEE standard method on 3560 switch?
|
Int f0/1
switchport trunk encapsulation dot1q
switchport mode trunk
|
|
Command to enable VTP pruning on VLAN 3 and 4 on a trunk link f0/1?
|
Int f0/1
switchport trunk pruning vlan 3-4
|
|
What is switch port mode which becomes trunk if neighbour int is trunk or desirable mode?
|
Dynamic auto
|
