NJ Transit Safety - LETP

Fouling a Track – the location of an individual or equipment in such proximity to a track that the individual or equipment could be struck by a moving train or on track equipment, or in any case is within _____feet of the field side of the nearest rail.

Working Limits – A segment of track within defined limits established in accordance with the on track safety regulations where roadways workers are provided __________ against the movement trains and on track equipment.

Employees must keep the Summary Safety Bulletin (S-6) in their ________.

Employees must report to work at the________.

Employees must not absent themselves from duty or engage a substitute to perform their duties without permission of a ___________________.

Employees must give___________ written notice of change in residence or telephone number to a designated officer.

Employees must_____________ of the location of first aid kits, eye wash stations, shower drenches, lifesaving and fire-fighting equipment, and use that equipment only for the purposes intended.

Employees must keep at least _____ feet from dangling wires.

Prior to sitting on a chair or seat, employees must inspect and ensure that the chair or seat is free of ______________________. If necessary to adjust seat, keep finders away from pinch points.

Where more than one track is to be crossed, employees must ____________________.

Employees must not cross tracks closer than_____ feet from standing equipment.

Employees must not cross a track in from of moving equipment unless they are able to clear the track at least _____ seconds prior to the passage of the equipment.

Employees, who have been issued ____________, must wear them when; in shop areas except in offices, when occupying the operating compartment of a train, while inspecting or working on equipment.

Employees must wear approved and properly fitted _____________________ at all times when on or about any track, except when in passenger train and engine service.

When an employee is to go under or between equipment, engineer must be informed to provide _______________.